Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System

£445.00
In stock
SKU
DENDF400-QC-SSP

Special offer! Now comes with an Osmio Sanser 500ml Sanitising Spray Generator worth £59 completely free of charge as a gift to the world of sustainability and saving costs to the world! Valid until 31st March 2024!

Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System is a digitally controlled Direct Flow (no tank) reverse osmosis system with Smart Water capability that is specifically designed for dental and medical applications where deionized water is required. Direct flow means much better performance with no tank maintenance, meaning much higher and more reliable water quality, easier maintenance and more hygienic.

Frequently Bought Together
Total price

Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System

The Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System is a clean and modern, leading technology Direct Flow (No tank) reverse osmosis system that will ensure your decon room operation is more sanitary, water is on demand, and much easier maintenance. A major benefit of Direct Flow Reverse Osmosis versus conventional tank-based reverse osmosis, is the huge level of water saved by Direct Flow, not to mention there is no need to sanitise the tank. Bacteria build up of tanks is a primary reason why many dental surgeries end up getting poor membrane performance, due to bacteria build up and membrane fouling, and end up using more DI resin as this is doing more heavy lifting because of poor membrane performance.

The Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System uses 400 GPD Direct Flow Reverse Osmosis Membrane to provide a freshly purified on demand flow (approximately 1LPM at 3 bar incoming pressure).

✓ Ideal for autoclaves / sterilisers. Remove up to 99.99% of impurities from UK mains water.

✓ Under the counter commercial system that generates Deionized Water.

✓ Total of 5 filters, hygienically packaged. Meets HTM requirements and can deliver 0-3ppm, which is distilled quality.

✓ Smart Water - Analyzes water, tracks filter lifetime and optimizes system performance.

✓ Saves over 30,000 litres per year of water, a huge saving for any Dental Practice, Laboratory or School.

✓ Small footprint / Easy installation, standing model - no mounting to walls required.

✓ 6 month filter lifetime (first four filters) / deionized filter lifetime variable

✓ Full, courteous support provided by experienced professionals.

Please download the manual from the files section below prior to purchase, as this is not included as a printed version in the box with the system. We highly recommend that you ask your plumber/installer to get in touch before installing the system if they are not familiar with installing reverse osmosis systems.

The perfect solution for Dental Practices - comes complete tap and fitting kit

The Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System is a digitally controlled reverse osmosis system with Smart Water capability that is specifically designed for dental and medical applications where deionized water is required. The system incorporates high-quality filters, easy Plug & Play components and a digital controller which tracks filter lifetime as well as measure instantaneous water purity.

After the reverse osmosis process, the HT+ is equipped with a mixed bed filter which purifies the water down to deionized levels. The mixed bed filter will change colour when it is time to change it, additionally, the digital controller can be set to cut water when the filter lifetime is achieved in order to not damage the autoclave sterilisers.

The system also comes equipped with a digital controller with Smart Water capabilities. HT+ continuously analyses the purified water and displays the results on screen. The system will know when water is consumed and immediately reverse flush the membrane filters afterwards to protect water quality. The Smart Water System does many things in the background such as track water temperature, errors and filter lifetime in order to give the highest up-time possible while delivering the best experience. With the push of a button or by looking at the bar graph on the display, the user will know exactly how many days are left until the next filter change. The system will also create a sound alarm when it is time to change the filters and even cut the water flow if it is surpassed significantly.

The Osmio HT+ DI is specifically designed to generate DI water for many applications including pharmaceutical, detergent, dental and medical.

Dental Reverse Osmosis RO system for lab for autoclave

Installation Precautions

1. This, and any other pressurised system connected to the water mains, or pumped from a tank or gravity fed, should be protected as appropriate from leaks. It is necessary to ensure that the property where this system will be installed has controlled pressure regulation using a Pressure Reducing Valve to ensure the maximum pressure cannot go above the specified parameters. You are also advised to use a leak detector, such that if any leak is detected, the supply to the system will shut off and not cause damage due to water leaking to the property. This is especially important as water [pressure can rise on the evenings and weekends to over double what you measure in the daytime.

2., Please use clean vinyl gloves when handling the filters and touching them. This is to avoid any bacterial contamination from your hands to the filters which can then multiply and cause a bad smell in the system.

More Information
ModelOsmio HT+ Dental & Lab Direct Flow Reverse Osmosis System
In DepthOsmio HT+ Dental & Lab Direct Flow Reverse Osmosis System

First 4 filters: 15,000 Liters or 6 Months whichever comes first
1) 5-Micron Sediment Filter
2) GAC Carbon Filter
3) CTO Carbon Blockr
4) 400 GPD Reverse Osmosis Membrane

5th Filter:
Mixed Bed Deionized Water Filter. 5th Filter (Deionized) When colour changes (for nominal inlet water quality and conditions)

Technical Specifications:

System Dimensions 48cm Height x 36cm Width x 24cm Depth
System Weight 12 KG
Electrical Lead Length: 147cm
Electrical Plug Type: UK 3 Pin

System Capacity
60 Liters / Hour @ 3 Bar
Incoming Hardness
35 °F Max.
Incoming TDS
600 PPM Max.
Incoming Temperature
10 - 30 °C
Incoming Pressure
2 Bar Min. 4.5 Bar Max.

The system comes with 1/4" and 3/8" tubing
3/8" inlet
1/4" outlet (tap) and drain
Filter ParameterBacteria, E-coli, Chlorine, Sediments, Nitrates, Fluoride, Limescale, Dissolved Solids (TDS), Hormones, Pharmaceuticals, Heavy Metals
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Product Questions

Sign In Hover me Please sign in to submit a question
What certification does this product is having ( like CSA, UL, and CE which ones?)
What is the total power consumption if the unit?
Question by: Leo gem on 24 May 2023, 21:15
Hi there, the product as a whole does not have a product level certification, only component level. The system uses 1.8 w/h when idle and 60 w/h when pumping.
Answer by: Mark Kent (Admin) on 1 Jun 2023, 12:12
Can I use harvested rainwater as the main water input supply for this.
TIA
Mark
Question by: Mark on 30 Jul 2021, 20:59
you can use rainwater, however, minimum pressure required for the system is 2 bar, also water needs to be prefiltered to 5 mic
Answer by: Irina Orlenko on 16 Aug 2021, 17:23
Where can I dowload the manual from, nonsence its not included considering the price.
Question by: Buchan on 23 Apr 2022, 12:27
The manuals for all systems are emailed out after purchase, we don't include paper copies to reduce paper printing and do our bit for the environment. You can download the manual using this link https://www.osmiowater.co.uk/mwdownloads/download/link/id/95/
Answer by: Sharon Little (Admin) on 25 Apr 2022, 09:45