- Point of Use
Point of Entry
Replacements & Parts
- Compare Systems
Frequently bought together:
Revitalised mind, body and spirit with the Osmio Grey Line Reverse Osmosis Systems.
The Osmio Grey Line 5-Stage Pumped Reverse Osmosis Water Filter is a high quality pumped reverse osmosis system specifically designed for safer, healthier water. The system requires a minimum of 1.8 bar incoming pressure and a maximum if 6 bar. (pressure reducing valve required over 6 bar.
High Capacity Reverse Osmosis water filtration for safer, healthier water. This under sink mounted water filter and water softener removes up to 99% of over 1,000 contaminants, including lead (removes up to 98% of lead), chlorine, fluoride, arsenic, hormones, asbestos, calcium, sodium, bacteria, giardia, viruses and more.
Experience clean, safe, good-tasting water every time you turn on the faucet. Enjoy crystal clear ice cubes, fresher tea and coffee, better tasting foods, healthier baby formula – even better than most bottled water.
The RO membrane removes not only harmful pollutants but also a few helpful minerals. As a result, a standard 5 stage RO system produces slightly acidic water with a pH of 7.0 or below.
Premium quality components ensure highest reliability and low maintenance for many years to come. Clear see-through 1st stage housing makes filter inspection a snap.
Easy, do-it-yourself installation, typically in a couple of hours with industry-leading help just a phone call away. Fits under a standard kitchen sink, with all parts included and clear, well-organized instructions and videos. For leak-free installation, simply push tubing ½ inch deep into quick-fitting connectors and lock - no threading pipes needed.
|Filter Parameter||Bacteria, E-coli, Chlorine, Sediments, Nitrates, Fluoride, Limescale, Dissolved Solids (TDS), Hormones, Pharmaceuticals, Heavy Metals|
Feed Water Pressure 1.8 Bar Min. - 6 Bar Max. If the pressure exceeds 6 bar, a pressure regulator can be installed at the system inlet. This part is not supplied with the kit. Pressure reducing valves are widely available at Plumbers merchants and online.
The system will produce approximately 10 litres per hour at 3 bar incoming pressure.
Feed Water Temperature 4 - 40 oC
Feed Water Connection 1/2" NPT
System Dimensions (L x W x H) 40 cm x 17 cm x 44 cm
System Weight (no water) 10 KG
Tank Dimensions (L x W x H) 24 cm x 24 cm x 37 cm
Tank Weight (no water) 3 KG
Tank Air Pressure 6-8 PSI***
Feed water requirements:
pH 6.5 - 8.5
Turbidity < 5 NTU
TDS < 500 PPM
Hardness < 500 PPM CaCO3 (50 oF) (28 odH)
Chloride < 250 PPM
Free Chlorine < 0.7 PPM
Iron < 0.1 PPM
Manganese < 0.1 PPM
Silica < 0.1 PPM
Chemical Oxygen Demand < 5 PPM O2
Total Bacteria Count < 50 CFU / mL
E. Coli < 3 CFU
The product and components within the system have the following test reports and certifications:
• Notified Body CE Certificate
• IEC IEC 60335-1 Houshold Certificate
• ISO 9001 Certificate
• ISO 14001 Certificate
• SGS Heavy Metal Test Report
Been working with RO water systems for over 30 years now. These are by far the best systems ive ever used. The quality is excellent and the value for money also great. The replacement cartridges seem a bit more expensive so hoping that they are much better quality than what ive used before too.