Osmio Filox-R 12 x 52 Inch Iron and Manganese Water Filter 45 LPM with 1'' Bypass Assembly

Call 0330 113 7181 or email info@osmiowater.co.uk to pre-order

Out of stock
SKU
NF12-W100F
If you are experiencing unpleasant metallic tastes, rust particles, staining on the bath and sink and other plumbing fixtures, or red water and rotten egg smelling odours, the chances are that you water may have iron, manganese or hydrogen sulphide problems. You may have had your private water supply (well or borehole) tested and need to bring your iron and manganese and hydrogen sulphide levels in line with Private Water Supply Regulations.Next Day Delivery is not available for this product.

This Osmio Filox 10 x 54 Inch Iron and Manganese Water Filter is a 12 x 52 Inch Mineral Tank suitable for flow rates up to a maximum of 45 litres per minute. It comes complete with the Clack 1" Time Clock Filter Valve, Clack 1" Bypass Valve Assembly and a choice of either a 1" or 3/4" BSP adaptor kit. Upgrades are available, see below.

If you are experiencing unpleasant metallic tastes, rust particles, staining on the bath and sink and other plumbing fixtures, or red water and rotten egg smelling odours, the chances are that you water may have iron, manganese or hydrogen sulfide problems. You may have had your private water supply (well or borehole) tested and need to bring your iron and manganese and hydrogen sulfide levels in line with Private Water Supply Regulations.

Our systems produced by Osmio Water Technologies have been treating iron, rotten odours and manganese water problems for over 100 years and it's fair to say they are the leaders in the industry. We have various systems available to you to suit your home. We provide the best quality at the best prices.

Contact us on 0330 113 7181 or by email: info@osmio.biz and speak with one of our qualified experts. Please send us your water test report along with an estimate of your peak flow rate and we will be able to put together the right package for your exact needs. We even provide a water testing service in partnership with South East Water to get you preferential rates on your water testing services.

Osmio Filox system advantages

• Highest flow rate of any iron removal media.

• No oxidizing chemicals needed for regeneration.

• High efficiency with 80% manganese dioxide for enhanced performance and capacity.

• Effective, from 5.0 to 9.0 pH.

• System is easy to program, with 10 pre-programmed regeneration cycles to optimize water treatment.

To ensure the suitability of this product for your needs, we recommend you speak to us before making your purchase. Please call us on 0330 113 7181 and seek advice from our technical team before making your purchase.

More Information
ModelOsmio Filox-R 12 x 52 Inch Iron and Manganese Water Filter
In DepthMineral Tank Size (Inches): 12 x 52
Media (litres): 56
Max Service Flow (l/m): 45
Min Back Wash Flow (l/m): 38
pH range: 5.0 - 9.0
Part No: NF12-W100F

Notes - All systems are supplied with:

1. Clack 1" Time Clock Filter Valve, comes with Drain Line Flow Control, set to correct program
2. Appropriate size of NSF certified mineral tank
3. Riser with bottom distributor attached and top basket (cut to vessel size)
4. Clack 1" bypass valve assembly
5. Either 1" or 3/4" BSP adaptor kit
6. Riser Anchoring Device
7. Appropriate volume of NSF Certified Filox-R media and under-bed gravel

Upgrades are possible as follows:

1. Clack 1" Metered Filter Valve
2. Clack 1" Motorised No Hardwater Bypass Valve
3. Clack 1" Elbow assembly kit (2 per set)

The system uses Filox-R Media which removes Iron, Manganese and Hydrogen Sulfide from your water supplies. The Filox media uses an oxidation-reduction reaction and filtration process similar to Greensand, but at a much higher level of performance. Filox-R contains 80% manganese dioxide in an extremely unique cluster format for enhanced performance and maximized capacity. Filox-R out performs Greensand, Brim, etc. due to the purity of its particles, superior oxidation/filtration capacity, and durability.

To ensure the suitability of this product for your needs, we recommend you speak to us before making your purchase. Please call us on 0330 113 7181 and seek advice from our technical team before making your purchase.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Product Questions

Sign In Hover me Please sign in to submit a question
We have sulphur gas coming from our borehole which supplies water to our large house. The water testing shows on both occasions that the water is fine for drinking etc. Is this the filter we should buy for removal of the sulphur gas at the point of water entry to the house from the borehole. ?
Question by: Bernard Herbert on 1 Dec 2021, 14:29
Normally for this issue we would recommend a catalytic carbon unit. These systems need to be sized with respect to your peak flow rate. We would also need a recent water supply analysis. Please can you email us with this information and then we can make a recommendation.
Answer by: mark burness (Admin) on 2 Dec 2021, 09:13