OilOut-99 Hydrocarbons Reduction Filter 2.5'' x 10''
- Buy 2 for £58.42 each and save 7%
- Buy 4 for £55.09 each and save 12%
- Buy 15 for £46.66 each and save 25%
The SRIF provides effective hydrocarbon removal at high flowrates while maintaining low pressure differential. Each pass through an OilOut can remove up to 99% of dissolved and dispersed hydrocarbons
Suitable for the polishing of trace hydrocarbons, the OilOut-99 is capable of absorbing up to three times its own weight before changeout is required. Designed to remove up to 99% of dispersed hydrocarbons, the SRIF filter is suited to applications where the inlet contamination is below 500mg/l, such as surface run off water, CNC machine coolant and bilge separators. The OilOut-99 achieves best results as a polishing phase after primary oil removal technologies or in a double-pass system and
is effective at removing a range of contaminants, including mineral oils and BTEX hydrocarbons.
Key Features
- Immediately absorbs hydrocarbons retaining up to 3x its own weight
- No release of hydrocarbons and extremely low pressure drop when saturated
- Cost effective hydrocarbon removal at high flow rates
- 25µm rating, used solely for oil reduction
Typical applications
- Surface run off water
- CNC coolant
- Bilge water treatment
- Engineering waste water
Model | OilOut-99 Hydrocarbons Reduction Filter |
---|---|
In Depth | Max. Operating Temperature 70°C Max. Operating Pressure Differential 1.4 bar Max Flow Rate 20 LPM Pressure Drop (Bar) 11 Average Oil Removal (g) Rating 25µm |