NanoCeram® 0.2 Micron Pleated Filter 4.5 x 10 Inch
Due to their unique construction, the NanoCeram® 0.2 Micron Pleated Filter (4.5 x 10 Inch), with their very high surface area offer: - Very high flow rates - Very low pressure loss - Very high dirt holding capacity - 5 log reduction for cysts - 5 log reduction for pathogenic bacteria” Each NanoCeram® pleated filter cartridge is designed to satisfy the most difficult requirements in water treatment. By using the scientific principal of electropositive attraction/capture, NanoCeram® technology leads to a rapid and highly efficient adsorption of virtually all particle sizes. NanoCeram®’s media has a high capacity for particles as large astens of microns or as small as a few nanometers. Each NanoCeram® Filter Cartridge exhibits a rating of 0.2μ . . . a rating typically associated with ultraporous membranes. Yet NanoCeram® flow rates are hundreds of times greater than such membranes.
-
NanoCeram® 0.2 Micron Pleated Filter 4.5 x 10 Inch£123.50
-
Osmio 1 Micron Absolute 4.5 x 10 Inch Pleated Water FilterSpecial Price £44.99 Regular Price £49.99
Due to their unique construction, the NanoCeram® 0.2 Micron Pleated Filter (4.5 x 10 Inch), with their very high surface area offer:
- Very high flow rates
- Very low pressure loss
- Very high dirt holding capacity
- 5 log reduction for cysts
- 5 log reduction for pathogenic bacteria”
Each NanoCeram® pleated filter cartridge is designed to satisfy the most difficult requirements in water treatment. By using the scientific principal of electropositive attraction/capture, NanoCeram® technology leads to a rapid and highly efficient adsorption of virtually all particle sizes.
NanoCeram®’s media has a high capacity for particles as large astens of microns or as small as a few nanometers. Each NanoCeram® Filter Cartridge exhibits a rating of 0.2μ . . . a rating typically associated with ultraporous membranes. Yet NanoCeram® flow rates are hundreds of times greater than such membranes.
Download The Data Sheet
Download the data sheet for the NanoCeram filter from the files section below.
Model | NanoCeram® 0.2 Micron Pleated Filter 4.5 x 10 Inch |
---|---|
In Depth | Pre-filtration: Required Housing Size Required: 4.5" x 10" Cartridge Size: 4.5" x 9.75" Capacity: 40,000 litres Material: Nanofibre Life Span: Average 12 months Max Flow: 100 Litres p/m Dry Weight: 0.5 Kg Principal applications: POE (point of entry, residential use) Thermally bonded blend of micro-glass fibres & cellulose infused with nano-alumina fibres in a non-woven matrix creates an electro-positively charged depth filter media. When assembled into a pleated cartridge, NanoCeram® offers a unique combination of efficiency, capacity, flow rate & low pressure drop at levels unmatched in today’s filtration marketplace. • Silt Density Index (SDI): ≤ 0.5 • Turbidity Reduction: < 0.01 NTU until Terminal ΔP (40psi) • Low ΔP: < 1.5psi @ 4gpm • Efficiency: 99.9% reduction of 0.2μ particulate (monodispersed latex spheres) • Flow Rate: 5mL/cm2/min @ 4gpm • Dirt Holding Capacity (DHC): 572 mg/in2 (A2 Fine Test Dust) • Cyst Retention: > 5 LRV • Bacteria (Klebsiella terrigena): > 5 LRV • Temperature Range: 39 - 135° F (4 - 57°C) • Maximum Pressure: 70 psi (4.83 bar) • Effective pH Range: 5 - 10 |