Osmio Flow-Pro Melt Blown 4.5 x 10 inch Sediment Filter
- Buy 6 for £9.17 each and save 52%
- Buy 12 for £5.99 each and save 68%
- Buy 24 for £5.10 each and save 73%
- Buy 48 for £3.60 each and save 81%
Osmio Flow-Pro Melt Blown 4.5 x 10 inch Sediment FilterCartridge
The Osmio Flow-Pro® Polypropylene Melt Blown Cartridges offer exceptional value where depth filtration is required. They are available in a wide range of micron sizes: 1,5,20 and 50 microns. The Osmio 4.5 x 10 Inch Melt Brown Cartridge fits all standard 10" water filter housings.
The filter is a compatible replacement filter for all 10 inch Big Blue filter housings by Culligan, Ametek, Pentek and others use industry standard size 10" x 4.5" filters.
The filtrer is highly effective at removing sediments and particles and is suitable for use with bio diesel applications.
Features & benefits
• Low cost
• Excellent chemical resistance
• Food grade ingredients
• No leachables
• High dirt holding capacity
• Wide range of lengths and micron ratings
• Potable water
• Pre-filtration for UV and reverse osmosis equipment
• Fine chemicals
• Plating solutions and more!
ANSI / NSF STANDARD 42 COMPONENT CERTIFIED
|Model||Osmio Flow-Pro Melt Blown 4.5 x 10 inch Sediment Filter Cartridge FPMB-BB1-10|
Material: Melt blown polypropylene
Maximum temperature: 140° F / 60° C
Maximum pressure: 40 PSID
Recommended change out: 30 PSID
Maximum flow rate: 2-8 GPM (US Gallons- based on micron rating)
Cartridge packaging: Individually shrink wrapped for purity
Types: Standard, Full-Flow and grooved
Available in the following micron ratings: 1, 5, 20 and 50
The filter is usually changed every 6 months (or sooner depending on incoming water quality)