Osmio EZFITPRO-200 & Osmio INDRA-PRO 200 Filter Replacement Pack
- Buy 2 for £37.00 each and save 14%
- Buy 10 for £32.34 each and save 25%
Filter 1:
NSF Certified 5 micron Carbon Block - changed every 6 months Top-of-the-line NSF certified coconut shell carbon block filter cartridge for chlorine, taste, odour and sediment reduction. Media wrap between centre tube and carbon block to reduce carbon fines. Made from 100% Natural Coconut Shell Carbon. Up to 99% chlorine reduction. FDA grade components & materials.
Filter 2:
Osmio Chlorine and Limescale filter - changed every 3-6 months (dependent on hardness)
✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction
✔ De-alk resin (Purolite C107E) – for temporary hardness and heavy metal reduction
The Osmio 2.5 x 10 Osmio Chlorine and Limescale filter incorporates granular activated carbon (GAC) which is combined with De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.
Model | E200BDL |
---|---|
In Depth | Filter 1: NSF Certified 5 Micron Carbon Block Micron Rating: 5 micron Dimensions: 9 3/4" x 2 1/2" Temperature Range: 50 - 125 F Max. Operating Pressure: 125 PSIG Filter Life: About 16000 litres or 6 months Filter Media: Extruded coconut shell carbon block Max. Flow Rate: Approx. 4 LPM Filter 2: GAC & De-Alk Dimensions: 9 3/4" x 2 1/2" Temperature Range: 50 - 125 F Max. Operating Pressure: 125 PSIG Filter Life: 3-6 months depending on hardness Capacity: 1080 Litres @ 150ppm Total Hardness - 540 Litres @ 300ppm Total Hardness. Replace after 6 months of installation date Max. Flow Rate: Approx. 4 LPM |
Filter Parameter | Chlorine, Sediments, Limescale, Heavy Metals |