Osmio Flow-Pro Melt Blown 2.5 x 20 inch Sediment Filter
- Buy 6 for £9.17 each and save 61%
- Buy 12 for £6.00 each and save 75%
Osmio Flow-Pro Melt Blown 2.5 x 20 inch Sediment Filter 5 Micron Cartridge
The Osmio Flow-Pro® Polypropylene Melt Blown Cartridges offer exceptional value where depth filtration is required. They are available in a wide range of micron sizes: 1,5 and 20 microns. The Osmio 2.5 x 20 Inch Melt Brown Cartridge fits all standard 20" water filter housings.
The filter is a compatible replacement filter for all 20 inch Big Blue filter housings by Culligan, Ametek, Pentek and others use industry standard size 20" x 2.5" filters.
The filtrer is highly effective at removing sediments and particles and is suitable for use with bio diesel applications.
Features & benefits
• Low cost
• Excellent chemical resistance
• Food grade ingredients
• No leachables
• High dirt holding capacity
• Wide range of lengths and micron ratings
Typical applications
• Potable water
• Beverages
• Pre-filtration for UV and reverse osmosis equipment
• Fine chemicals
• Electronics
• Plating solutions and more!
ANSI / NSF STANDARD 42 COMPONENT CERTIFIED
Model | Osmio Flow-Pro Melt Blown 2.5 x 20 inch Sediment Filter |
---|---|
In Depth | Specifications Material: Melt blown polypropylene Maximum temperature: 140° F / 60° C Maximum pressure: 40 PSID Recommended change out: 30 PSID Maximum flow rate: 2-8 GPM (US Gallons- based on micron rating) Cartridge packaging: Individually shrink wrapped for purity Types: Standard, Full-Flow and grooved Available in the following micron ratings: 1, 5, 20 and 50 Product code: FPMB5-20 Dimensions: 20" x 2 1/2" |