Osmio INDRA-200 Undersink Filter Kit
-
Osmio INDRA-200 Undersink Filter Kit£80.00
-
-
-
Osmio INDRA-200 Undersink Filter Kit & Tap
Comes with a choice of Chrome (metal free) Single Dispensing Tap or a 304 Stainless Steel brushed finish tap. Please choose the option using the drop down above.
Filter 1: The Osmio GAC & De-Alk Resin Cartridge - changed every 3-6 months (dependent on hardness)
✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction
✔ De-alk resin – for temporary hardness and heavy metal reduction
The Osmio 2.5 x 10 GAC & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.
The full kit includes:
The kit includes everything you need to get the system up and running and is easy to install.
1 of 10" Housing with 1/2" BSP Brass Female Ports
1 of 2.5 x 10 GAC & De-alk resin Filter
1 of Your choice of Tap (see drop down option above)
1 of 1/2" (male-female) Feed In Valve with 1/4" Adaptor
2 of 1/2" Male to 1/4" Push Fit
2 metres of 1/4" Tubing
If you would like a single kitchen tap which connects your hot, cold and filtered water in one stylish solution, you also have the option to buy this great water filter system with any of our Osmio 3 Way Triflow Taps
How to recycle and dispose of the filter: after using the filter for 3-6 months you will need to replace the filter. The Granular Activated Carbon within the filter will need to be emptied out and used for soil drainage and compost. Plastic components from the filter can be placed in plastic recycling.
Download the INDRA-200 Manual
Download the manual which covers the complete installation and maintenance guide for the system from the files section below.
| Model | INDRAFK2 |
|---|---|
| In Depth | Filter 1: Osmio GAC & De-Alk Dimensions: 9 3/4" x 2 1/2" Temperature Range: Only can be used with cold water Filter Life: 3-6 months depending on hardness Max. Flow Rate: Approx. 4 LPM The Osmio 2.5 x 10 GAC & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use. Please check the filter for any damage or cracks before installation. Ensure the water is flushed through for 5 minutes to clear any loose particles and carbon fines. Do not use with water which is microbiologically unsafe or of unknown quality. Use in cold water applications only. Contains NSF Certified Coconut Carbon and Hardness Resin. Assembled in the United Kingdom. Capacity: 1080 Litres @ 150ppm Total Hardness - 540 Litres @ 300ppm Total Hardness. Replace after 6 months of installation date |
| Filter Parameter | Limescale, Heavy Metals |
Product Questions
