Osmio INDRA-100 Undersink Filter Kit
Osmio INDRA-100 Undersink Filter Kit & Tap
✓ For removal of chlorine, taste odours and sediment
✓ High capacity filter 13,000 litres or 3000 US Gallons
✓ Easy and low cost filter change every 6 months
✓ Easy to fit
The Osmio INDRA-100 Undersink Water Filter Kit with Tap is the perfect water filter system for those looking to improve the taste of water by removing chlorine as well as many common impurities such as sediment, dirt, turbidity, rust, sand and silt.
The system uses the NSF certified Carbon Block filter made from coconut shells with 12,000 iodine, making them amongst the best specification carbon filter on the market. The filter primarily removes bad taste and odour caused by chlorine (a chemical used to treat and disinfect the water) and the filter also reduces lots of other industrial solvents, disinfection byproducts and chemicals, as well as pesticides.
The kit includes everything you need to get the system up and running and is easy to install.
The full kit includes:
1 of 10" Housing with 1/2" BSP Brass Female Ports
1 of 2.5 x 10 Carbon Block 5 Micron
1 of Your choice of tap - both lead free and options are chrome or stainless steel single dispensing tap.
1 of 1/2" (male-female) Feed In Valve with 1/4" Adaptor
2 of 1/2" Male to 1/4" Push Fit
2 metres of 1/4" Tubing
If you would like a single kitchen tap which connects your hot, cold and filtered water in one stylish solution, you also have the option to buy this great water filter system with any of our Osmio 3 Way Triflow Taps
How to recycle and dispose of the filter: after 6 months have passed you will need to change the replace the Carbon Block filter. The granular carbon media within the filter will need to be emptied out and used for soil drainage and compost. Plastic components from the filter can be placed in plastic recycling.
Download the Osmio INDRA Water Filter System Installation Guide from the files section below
Model | INDRAFK1 |
---|---|
In Depth | The 2.5" x 10" Carbon Block 5 Micron Filter Dual Pack filters use coconut carbon filtration technology to maximize the carbon capacity and prevent channeling whilst maintaining a low pressure drop leading to more efficient water filtration. The filter is a compatible replacement water filter cartridge for similar 10" filter housings including brands such as Pentek, Ametek, Culligan, Whirlpool, and so on. It will fit all under sink water filter housings which use a standard size small 10" x 2.5" filter replacement cartridge. Filter System The NSF approved 5 Micron Carbon Block filters (also certified by ISO) use coconut carbon filtration technology to maximize the carbon capacity and prevent channeling whilst maintaining a low pressure drop leading to more efficient water filtration. 2.5" x 10" Carbon Filter Specifications: Construction Notes 1. Outer polypropylene wrap extends the life of the block by preventing premature plugging. 2. Carbon block extruded from acid washed bituminous activated carbon. Technical Data Micron Ratings (μ) 5 Lengths (") 9¾ Operating Temperature: Only can be used with cold water Maximum Operating Pressure 4.5 bar, for good flow between 3-4 bar recommended Chlorine Reduction (L) > 3,000 gallons@ 0.5 gpm Length (nominal mm) 248 Outside Diameter (nominal mm) 65 Inside Diameter (nominal mm) 28 1. Projected Chlorine taste and odor reduction capacity when tested in accordance with NSF/ANSI42 protocol.* 2. Nominal particulate rating is for >85% of a given size as determined from single - pass particle counting results.** Tap Info: Dimensions: Height (total from the base): 240 mm Height (from base to spout): 175 mm Base Diameter: 30 mm Shank: 60 mm Distance from neck to spout: 125 mm |
Filter Parameter | Chlorine, Sediments |