- Point of Use
Point of Entry
Replacements & Parts
- Compare Systems
Duplex softeners are designed to supply softened water in situations where a continuous and uninterrupted supply of softened water is required. These systems therefore have a twin tank, so that there can always be one tank in service while the other thank is running a regeneration back wash or on standby, thereby guaranteeing a 24/7 soft water production.
A regeneration occurs when the mineral tank containing the softening resin needs to be backwashed in order to "recharge" the ion exchange ability of the softening resin to exchange calcium and magnesium (which cause lime scale) with sodium carbonate. During a regeneration cycle, the system will mix a brine (salt) solution in the brine tank and backwash the mineral tank, after which the system then sends the water down to the drain. During this time, the Duplex Softener will continue to produce softened water.
Regeneration is programmed to occur at a time when there is no or lower demand (typically during the night). The cycle can be programmed to occur according to water hardness and the volume of water used between cycles. Regeneration can also be made manually as and when required.
Our range of Duplex Water Softeners use high grade Purolite Softening Resin, NSF certified Minerals Tanks and the world's most reliable and well-established softener valve on the market today, made in the USA the Clack Valve, so you can ensure you are only buying top quality, reliable and cost effective equipment.
Use the table below to compare the performance of each model in our Duplex Water Softener range. If you have any questions, please contact our team on 0800 002 9533.
Unit 2B, Beechcroft Farm Industrial Estate, Ash, Kent TN15 7HX
0800 002 9533 - +441474240245
Text, call, send photos, videos to us on WhatsApp +44(0)7852323666
Mon - Fri / 8:30AM - 5:30PM