Osmio PRO-II-XL Advanced Whole House Water Filter System
The Osmio PRO-II-XL Advanced Whole House Water Filter System is our one of our top of the range and finest whole house water filter system for those seeking nothing but the very best filtration for chemicals and metals. Please note whole house filter systems are NOT for limescale, please see our softeners section. Whole house systems are usually combined with softeners (either salt or non-salt based) to achieve great results and reverse osmosis point of use system to achieve the complete gold standard of home treatment.
Osmio PRO-II-XL Advanced Whole House Water Filter System
We always have the environment in mind so we do not include printed manuals with our products. You will automatically receive a link to download your manual via email after you have placed your order. You can also find the user manuals for all our products on the individual product page.
If you need a printed manual, please add it to your order by ticking the box.
The Osmio PRO-II-XL Advanced Whole House Water Filter System is one of our top of the range and finest whole house water filter system for those seeking nothing but the very best.
The first filter is the Active Ceramics Large Whole House Filter which uses an advanced formulation of active-ceramics which are highly effective at reducing a wide array of water impurities including chlorine, toxins, heavy metals, hormones and fluoride. This filter is also highly advanced and effective at killing and containing bacteria in water such as E-coli, Pseudomonas and other microorganisms. The filter uses a unique filtration method using a patented active ceramics blend, so it has 4 different active ceramics that treat the water in a different way and is completely unique. Not only that but the filter adds antioxidants and minerals back into the water after filtering and additionally makes the water more alkaline by raising the pH value, usually increasing the pH to around 0.5 a point or more (however this could be more or less depending on a number of specific variables including the presence of certain dissolved solids and gases). This first filter is the main cartridge and is replaced every 3 years or 300,000 litres.
The second filter (which is an upgrade from the standard Osmio PRO-II System) is a 5-micron carbon block. This filter further reduces chlorine and nay taste and odour issues that may be present in the mains tap water. The carbon block also reduces certain Volatile Organic Chemicals (VOC) from drinking water. The coconut base of the carbon also makes a slightly sweeter taste which is pleasant. The carbon block has a very high dirt holding capacity with virtually zero pressure drop. The filter is rated for 46,000 litres so it is usually changed every 6 months.
At the end of the life of the main cartridge, you can take out the ceramics and use it to fertilize your garden to improve the health of plants or grass and soil drainage. The plastic housing can be put through your normal recycling waste.
Download the Osmio Whole House Water Filter Systems Manual
Download this manual which covers the complete installation and maintenance guide for the entire Osmio Whole House FIlter Systems range.
|Model||Osmio PRO-II-XL Advanced Whole House Water Filter System|
|In Depth||Ideal for medium/large home with pipework up to 1” diameter.
Drink filtered water from any tap throughout the house. No need for filter jugs or separate drinking faucet.
Unit will remove or reduce chlorine, toxins, heavy metals, hormones and fluoride. Effective at killing and containing bacteria in water such as E-coli, Pseudomonas etc.
De-chlorinated water which is less aggressive on skin and hair in the shower.
Produces pH enhanced water with minerals and increased alkalinity. Increases anti-oxidants in the water too.
No ongoing maintenance or need to backwash system. Merely replace cartridge at end of life at low cost.
Post filter required for polished water and removal of sediment including dust, rust and other particulates.
Environmentally friendly due to long life nature and less going to landfill. No more bottled water. Naturally degradable ceramics which can be scattered on lawn and plants at end of life for improved soil drainage and plant growth.
The complete package comes with 2 filters in total:
1 x Active Ceramics Large Main Filter - 3 year filter life or 300,000 litre capacity. Life of filter may vary depending on water hardness and local water quality.
1 x NSF Certified 4.5 x 20 Inch 5 Micron Carbon Block - filter life 6 to 12 months depending on usage.
Full Kit includes filters, full flow blue housings with 1" BSP female ports, brackets with screws and large housing spanner.
Straight thread design on sump EPDM O-ring
Max Pressure: 90 psi (6.3 bar)
Max Temperature: 125°F
Service Flow Rate: up to 70 LPM @ 60 psi
Housing Options: Pressure Relief
Standing pressure loss ~0.5 Bar at 2.2 bar pressure
Each Housing has the following dimensions (there are two housings in total)
23-7/8" x 7-1/4" (606 mm x 184 mm)
System is supplied as two separate housings to enable greater flexibility when installing the system (e.g. when installing in an L-Shape or one on top of the other).
Cap : Polypropylene
Sump: Styrene Acrylonitrile
Button Assembly 300 series stainless steel, EPDM, Polypropylene
Flow rate: filtration designed to work up to a peak of 65 litres per minute.
Big Blue housing and cartridge - WRAS approved. The material of the spheres is approved by the Water Research Centre under the Water Bylaws scheme for use in contact with potable water. NSF approval has also been granted. The active ceramic media has been tested by South West Water Laboratories for microbiological removal and certified for bacterial removal.
Pressure Loss: To help avoid any potential disappointment with resulting pressure loss, we advise not to install this system if your standing water pressure is lower than 2 bar.
|Filter Parameter||Bacteria, E-coli, Chlorine, Sediments, Fluoride, Hormones, Pharmaceuticals, Heavy Metals|
You will also need to allow approx 100 - 150mm for the fittings, to connect the two housings and one on each end. The housings do not have to be mounted inline they can be mounted vertically one above the other or around a corner if space is tight
You should also allow room below to be able to drop the filter housing when changing filters, you will need another 50mm in height to allow this.
We also recommend that you fit a bypass to the system to allow maintenance. (See the installation manual on the product webpage for indication of a typical by-pass installation
The Maxi-soft dimensions are Height 210 mm, Width 90 mm, Depth 140 mm, and again 50mm needs to be allowed to remove the bowl for refilling and an allowance needs to be made for fittings
The filter system is usually installed before the Maxisoft