Osmio 2.5 x 10 Inch Single Stage DI Resin Filter Kit
The Osmio 2.5 x 10 Inch Single Stage DI Resin Filter Kit is the ideal add-on to any RODI (reverse osmosis with deionisation resin) system. If you are finding the need to change the DI resin too often, the solution is to add more stages. Order this filter kit with fast delivery to extend the volume of media and therefore, the frequency of changing your DI Resin.
The Osmio 2.5 x 10 Inch Single Stage DI Resin Filter Kit is the ideal add-on to any RODI (reverse osmosis with deionization resin) system. If you are finding the need to change the DI resin too often, the solution is to add more stages. Order this filter kit with fast delivery to extend the volume of media and therefore, the frequency of changing your DI Resin.
This product contains the following SKUs.
- 1 x SKU ZB1380306
- 1 x SKU 2510DIRES
- 1 x SKU AMC0407-2
- 1 x SKU 1500152101-a
Please note this collection of parts does not come with any written instructions. You will need to have some PTFE tape to tape the male fittings which are screwed by hand and then tightened with a regular spanner. In addition to PTFE tape and an adjustable spanner, you will need plumber's grease (food-grade silicon grease) for greasing and re-greasing the O ring on the top of the housing bowl. You will also need appropriate screws or fixings to mount the housing at least 2" from the ground on a strong enough vertical wall.
In Depth | Box contains the following: 1 x SKUZB1380306 1 x SKU2510DIRES 1 x SKUAMC0407-2 1 x SKU 1500152101-a Clear Sump; White Cap; 1/2 in BSPP Inlet & Outlet: 1/2 Inch Female Ports Dimensions (mm): A: 325 B: 122 C: 107 Made in Italy from NSF and FDA grade materials. Our under counter filter housings are manufactured from the highest quality, FDA grade, 100% polypropylene and acrylic styrene. Leak-proof sealing is accomplished by compression against a top seated EPDM o-ring located in the housing’s sump. Thick walls and added ribs make the housings ideal for a wide range of applications. Polypropylene construction provides excellent chemical resistance with most acids, alcohol, ammonia, oils, plating solutions and many aggressive chemicals. Housing supplied without a pressure release valve. Rated for temperatures to 125°F (52°C) and pressures to 125 psid (8.75 bar). |
---|