Osmio EZFITPRO - 400 Fluoride, Limescale and Heavy Metal Reduction Undersink Filter Kit

In stock
This is one of the top of the range installed inline system for an existing cold tap. It uses a 0.2 micron ceramic fluoride reduction filter and a limescale and heavy metal filter to achieve a thorough reduction of bacteria, chlorine, heavy metals and more. It reduces pressure and flow rate of your water to tap, so it is not recommended if you have very poor flow/low pressure. Slower flow means better water so it is good to live with that!
Frequently Bought Together
Total price

Osmio EZFITPRO-400 Undersink Water Filter Kit 15mm Push Fit

Filter 1: Coldstream CF521W ceramic filter cartrige. 

✓ Made in the UK by world leading manufacturer

✓ >99.9999% removal of bacteria and cysts

✓ 85% fluoride reduction at 2.5LPM 

The Osmio INDRA-400 Undersink Water Filter Kit with Tap is the perfect water filter system for those looking to improve the quality of water by removing bacteria, viruses, fluoride and pharmaceuticals as well as many common impurities such as sediment, dirt, turbidity, rust, sand and silt.

The system uses the Coldstream CF521W Ceramic Water Filter Cartridge 2.9" x 9.75" which is capable of 85% fluoride removal as well as chlorine, heavy metals and bacteria and cysts, making it the most powerful ceramic cartridge currently on the market. 

Filter 2: GAC Phosphate & De-Alk
Dimensions: 9 3/4" x 2 1/2"
Temperature Range: Only can be used with cold water
Max. Operating Pressure: 125 PSIG
Filter Life: 3-6 months depending on the hardness
Capacity: 1080 Litres @ 150ppm Total Hardness - 540 Litres @ 300ppm Total Hardness. Replace after 6 months of installation date
Max. Flow Rate: Approx. 4 -5 LPM

How to recycle and dispose of this filter: In order to recycle the filter you will need to smash the ceramic and the filter media within should go into the bin. The plastic ends of the filter can be recycled. 

More Information
Model EZFITPRO-400
In Depth Coldstream MAX CFW Ceramic Water Filter Cartridge 2.9" x 9.75" OBE
Osmio GAC Phosphate & De-Alk

Operating performance Working Pressure (for pressure use)
Minimum 3 Bar Max 4 bar - for good flow rate

Working parameters

For a good flow rate, we recommend a minimum incoming pressure of at least 3 bar unless you are using it on a separate tap in which case 2 bar minimum is fine.

Working temperature range: only can be used with cold water
Working ph range 5.5 - 9.5
Recommended change frequency 6 -12 months

- Osmio 2.5 x 10 Inch Dual Filter Housing (1/2" BSP Female Inlet/Outlet (Brass lined))
- Dual Mounting Bracket
- Housing Spanner
- 2 x 1/2" BSP male to 15mm push fit
- 1 x Chlorine and limescale filter
- 1 x Coldstream Ceramic filter
Filter Parameter Bacteria, E-coli, Chlorine, Sediments, Fluoride, Heavy Metals
Write Your Own Review
You're reviewing:Osmio EZFITPRO - 400 Fluoride, Limescale and Heavy Metal Reduction Undersink Filter Kit
Your Rating
(Size: 305.7 KB)

Product Questions

No questions yet. Be the first to ask the question!