Osmio INDRA-PRO 300 Undersink Filter Kit - All Questions

Osmio INDRA-PRO 300 Undersink Filter Kit

SKU

INDRAFK3-PRO

How long from ordering to delivery, please?

Question by: LindaWatson on 12 May 2021, 16:31

if an order placed before 15.30 - we despatch the same day with DPD. Normally order arrives the next working day, with a small number of exceptions.

Answer by: Irina Orlenko on 18 May 2021, 22:46

Can you say what size particles osmio filters for the Osmio Indra Pro 300 eliminate? 0.1, 2.5, 1.0? I am interested in capacity to eliminate microplastics. Thanks

Question by: Elliot Stern on 29 Jul 2021, 17:28

CF108W filter has a rating of 0.2 microns, so will reduce particles over 0.2 mic.

Answer by: Irina Orlenko on 16 Aug 2021, 17:24

Can the water filter be connected to a 15mm copper line directly, rather than using the 1/4 inch tubing adapter?

Question by: Neil Mills on 8 Feb 2023, 22:02

If you need a kit that connects directly to 15mm then you can use the EZFITPRO-300 kit which comes with 15mm push fits, when fitting to an existing cold feed and not installing to a dedicated filtered water tap (single dispensing/three way tap) then you need a minimum of 3 bar pressure.

https://www.osmiowater.co.uk/water-filters/in-line-water-filter-systems/keep-your-existing-tap-water-filter-systems/watts-ezfitpro-ii-ultracarb-and-fluoride-water-filter-system.html

Answer by: Sharon Little (Admin) on 9 Feb 2023, 10:57

Re previous question. I have already purchased this item and am awaiting delivery .
I am fitting it a dedicated stand alone drinking water tap. However due to my installation I will not be teeing off from the existing tap hose. I will be teeing in to a 15mm line. I realise I will need to add adapters to connect to the filter inlet.

My question was does the unit have to be fed from the 1/4 inch tubing? Does it increase pressure for example? I can fit the unit either way, it was just to give myself more options.

Question by: Neil Mills on 9 Feb 2023, 11:48

No, the unit doesn't need to connect to the 1/4" tubing. You'll need a 15mm Push Fitting to 1/2" BSP Male. Here is the link.

https://www.osmiowater.co.uk/15mm-push-fitting-to-1-2-bsp-male-thread.html

Answer by: Paulius Matevicus (Admin) on 9 Feb 2023, 14:16

Hi does filters need to be in particular order from inlet, wich one first ceramic or limescale & chlorine?
Regards
Jarek

Question by: Jarek on 11 May 2023, 08:42

We recommend to install as below in the direction of the flow:
Filter 1 : Ceramic
Filter 2 : Limescale and Chlorine

You can download manual from section ''files'' under product description

Answer by: Mark Kent (Admin) on 12 May 2023, 10:45