Purolite 40L Simplex Water Softener 10 x 44 Inch 27 LPM
Call 0330 113 7181 or email info@osmiowater.co.uk to pre-order
Purolite 40L Simplex Water Softener 10 x 44 Inch 27 LPM
The Purolite Simplex Water Softener Units are suitable for both commercial and large residential applications. The system uses a 1" Clack Time Clock Softener Valve which undertakes a regeneration cycle whenever it is programmed to do so. Upgrading to a Metered Valve is available which will regenerate according to water usage and the hardness setting programmed into the valve.
The resin inside the NSF certified mineral tank is high quality Purolite C100E Cation Softener Ion-Exchange Softener Resin.
Simplex Water Softener Specification
Model number: JF1044/40L/TCS
Mineral Tank Size (Inches): 10 x 44
Softener Resin Volume (litres): 40
Service Flow (m3/hr): 1.6
Volume between Regens @ 300ppm (m3): 6.6
Unit comes supplied with:
1. 1” Clack Softener Control Valve – either Time Clock or Metered
2. Appropriate size of NSF certified mineral tank
3. Riser with bottom distributor attached and top basket (cut to vessel size)
4. Either 1" or 3/4" BSP adaptor kit – please specify
5. Appropriate volume of Softener Resin
6. Appropriate size brine tank
7. No Salt
Download The Manual
Download the manual which covers the complete installation and maintenance guide for the system from the files section below.
Model | Purolite 40L Simplex Water Softener 10 x 44 Inch 27 LPM |
---|---|
In Depth | Comes supplied with 1. 1” Clack Softener Control Valve – either Time Clock or Metered 2. Appropriate size of NSF certified mineral tank 3. Riser with bottom distributor attached and top basket (cut to vessel size) 4. Either 1" or 3/4" BSP adaptor kit – please specify 5. Appropriate volume of Softener Resin 6. Appropriate size brine tank 7. No Salt Volume of softener resin: 40 litres Approx footprint: 70 cm x 40 cm Vessel Size – Diam x Height (inches) 10 x 44 Brine Tank dimensions (inches):15 x 15 x 30 high Brine tank volume (litres): 85 Approx Water Usage per Regen: 300 litres Salt Usage per regen (kgs): 6.0 Volume between regens @ 300 ppm CaCO3: 6.6 m3 Service Flow Rate (m3/hr): 1.6 |
Filter Parameter | Limescale |