Osmio Zero Reverse Osmosis Replacement Filters Pack for Hard Water

£60.00
In stock
SKU
ZIP-II-RPRO-HD
  • Buy 2 for £52.20 each and save 13%
  • Buy 4 for £47.40 each and save 21%

Please note - this item is out of stock. Stock arriving shortly. Orders will be despatched around 31.03.2023

Replacement filters pack for the Osmio Zero-IP-II Portable Reverse Osmosis Water Filter System from Osmio Water for Hard water area. Designed for hard water areas with hardness over 200 ppm.

Frequently Bought Together
Total price

Osmio Zero Reverse Osmosis Replacement Filters Pack

Buy the replacement filters pack for the Osmio Zero Reverse Osmosis Water Filter System from Osmio Water with free and fast delivery.

If you have a hardness level over 250 Calcium Carbonate then you may need to change the carbon block and membrane more frequently than every 6 months. The unit is designed to shut off if there is blockage in the membrane or prefilters. As the system recirculates the rejected water from the membrane, the TDS level continually rises of the water entering the membrane filter. Therefore, for those with water of higher TDS, more frequent carbon block and membrane changes are likely. It is recommended to have at least a spare carbon filter and membrane on hand with the unit at all times. 

Filter Stages:

1 - Quick-Change Sediment Filter 5μm: removes coarse particles, e.g. Sand, rust, chlorine, lime
2 - Quick-Change 1 mic Composite Carbon filter: removes chlorine and organic impurities, helps to inhibit limescale
3 - Quick-Change Membrane 50GPD: removes all pollutants and flavours to almost 100%
4 - Quick-Change Insertion Filters: Hygiene After-filter antibacterial: removes 99% of the bacteria and viruses and improves the taste

How to recycle and dispose of Osmio Zero water filters 

Quick-Change activated carbon filter and Quick-Change membrane 50GPD filter: these two filters can be placed in plastics recycling. However, the bottom of the filters will first need to be cut open using a hacksaw. The carbon and membrane elements can then be removed and thrown into the bin before placing the filters in recycling.

Quick-Change Sediment filter: This can simply be placed into the plastics recycling.

Quick-Change Insertion filter: This filter should again be cut in half and the contents emptied out into the bin before recycling the plastic exterior.

More Information
ModelOsmio Zero Reverse Osmosis Replacement Filters Pack
In DepthFilter Stages:

1 - Quick-Change Sediment Filter 5μm: removes coarse particles, e.g. Sand, rust, chlorine, lime
2 - Quick-Change Polyphosphate impregnated composite carbon filter: removes chlorine and organic impurities
3 - Quick-Change Membrane 50GPD: removes all pollutants and flavors to almost 100%
4 - Quick-Change Insertion Filters: Hygiene After-filter antibacterial: removes 99% of the bacteria and viruses


Please Note:
The filters may show a different label to the image shown, if you are unsure you have received the correct items please contact us with an image of the items you have received to into@osmiowater.co.uk and we will be able to further assist you.
Filter ParameterBacteria, E-coli, Chlorine, Sediments, Nitrates, Fluoride, Limescale, Dissolved Solids (TDS), Hormones, Pharmaceuticals, Heavy Metals
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Product Questions

Sign In Hover me Please sign in to submit a question
Good morning,

We have an Osmio0 reverse osmosis machine. The red light of maintenance is now always on and the engine does not stop (you can hear its sound for very long time).
Is there anything that we can do to fix that?

Thank you for your help.
Mercedes
Question by: Mercedes Ramírez on 29 Oct 2022, 12:21
Please do the following:

- Dispense all water from the system (1 x long press or 3 short presses) - the filtering light will come on
- time how long it takes for the filtering light to go off.
- if your filtering take less than 13 min and filters were changed during last 6 months - reset the maintenance light as per manual 5.2.3
- If your filters were not changed during last 6 months - change filters, then do a reset
- or filtering takes over 13 minutes - get in touch with customer service team info@osmiowater.co.uk
Answer by: Irina Orlenko (Admin) on 31 Oct 2022, 11:00
Q1 - What exactly causes the "maintenance" light to come on? How does Osmio Zero detect that it is time to change the filters?

Q2 - Should the filters be replaced every 6 months even if the "maintenance" light has not come on? (in my case the light has come on only after 1 year. Mine is a single person household so the usage of the Osmio Zero is lower than that of a household with more people.)

Q3 - Can Osmio Zero be used with the "maintenance" light on for 2-3 weeks? Or is it necessary to change the filters right away? The filter is dispensing water without any issues. And when measured with a TDS meter it shows a reading of ~80 when usually it is ~50 so it still seems to be working well.

Thank you.
Question by: Russell on 17 Nov 2022, 22:29
Q1: It measures litres and TDS. The Maintenance light will come on every 2000 litres so thats why you need to do the reset process to reset it to 0, so the system knows it has new filters. The light will also come on if there is a TDS problem with the drain line which indicates membrane needs changing

Q2: Yes we recommend everyone to change the filters every 6 months, but if the system is used in soft water areas with a lower TDS then the membrane itself can last longer. TDS only measures electrical conductivity not gasses, so bare in mind that carbon absorbs gasses like a sponge, and there is no way to detect when that capacity is full, so its better to implement a planned changing routine every 6 months.

Q3: It depends for what reason the light is on, for example could be because it was never reset. If you reset and it comes back on right away or soon after, it means it needs attention, so filter changing and descaling.
Answer by: Irina Orlenko (Admin) on 22 Nov 2022, 09:46
Following question from Mercedes Ramirez, I don't have the manual anymore, could you please explain how to reset the maintenance light as per manual 5.2.3?

Many thanks
Chloe
Question by: Chloe on 25 Aug 2023, 20:53
The manuals is always available online under the Files section
Answer by: Irina Orlenko (Admin) on 28 Aug 2023, 11:20
I need to get some of the pre filters for spare in my on counter water filter /heater it’s the filters that go in the bottom of the tank white in colour with 1to12 printed on top they are blocking whilst the remainder are working well seeing as I have London water they seem to block quite quickly I would like 4of them if you can please happy new year Andy
Question by: Andrew watson on 13 Jan 2023, 00:49
Happy New Year Andy, the sediment filter in the supply tank is not usually a filter prone to blockage, these should last the full 6 months. May I please ask you email us at info@osmiowater.co.uk then we can help troubleshoot your filter blockage issues.
Answer by: mark burness (Admin) on 13 Jan 2023, 12:00
Hi. I was wondering if you know when you will have these back in stock?
Thanks Paul
Question by: Paul wood on 5 Dec 2021, 08:37
We are hoping this Wednesday.
Answer by: Mark Kent (Admin) on 6 Dec 2021, 13:26