Osmio EZFITPRO-200 Undersink Water Filter Kit 15mm Push Fit
Like the 100, this model fits onto an existing cold supply to make the cold tap all filtered. It has the chlorine and additional limescale and heavy metal filter. The filters are changed usually every 6 months.
Osmio EZFITPRO-200 Undersink Water Filter Kit 15mm Push Fit
The Osmio EZFITPRO-200 Chlorine, Limescale & Lead Water Filter System is an ideal water filter system for installing under the kitchen sink. The system has no need for a separate tap as it will filter all the water coming from your existing kitchen tap. This is because the Osmio EZFITPRO-200 Chlorine, Limescale & Lead Water Filter System uses 15mm push fittings for the inlet and outlet. This means your 15 mm copper or plastic pipe can simply be pushed into the unit and released with ease.
The Osmio EZFITPRO-200 Chlorine, Limescale & Lead Water Filter System therefore makes a perfect solution for an easy installation as it can be fitted in less than 15 minutes. The system is perfect if you have a solid kitchen worktop (marble, granite, stone, wood etc.) and do not want to have a separate tap in place. There is an option to have this exact system with a separate tap and fitting kit if you would prefer to have this option, as many people which children or very elderly persons do often prefer a separate tap.
We recommend checking your water pressure before installing the system as it requires a 1.5 bar minimum pressure.
What does the Osmio EZFITPRO-200 Chlorine, Limescale & Lead Water Filter System remove?
There are two filters in the system, which both serve a different purpose with the ultimate result being purified, clean, healthy and great tasting water for all your drinking, cooking, washing and cleaning needs.
Filter 1: Osmio NSF Certified 5 micron Carbon Block - changed every 6 months
Top-of-the-line NSF certified coconut shell carbon block filter cartridge for chlorine, taste, odour and sediment reduction. Media wrap between center tube and carbon block to reduce carbon fines. Made from 100% Natural Coconut Shell Carbon. Up to 99% chlorine reduction. FDA grade components & materials.
Filter 2: The Osmio 2.5 x 10 Chlorine & Limescale Filter - changed approx every 3-6 months (dependent on hardness and overall water quality)
✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction
✔ De-alk resin – for temporary hardness and heavy metal reduction
The Osmio 2.5 x 10 Chlorine & Limescale Filter incorporates granular activated carbon (GAC) which is combined with De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at approx 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water, water quality and the amount of water you use.
Filter reminders
By buying this product online, you will receive automatic filter reminder emails every 6 months so you do not need to worry about remembering when to change them.
Recycling and disposing of these filters
Both of these filters will need the granular carbon within the filter to be emptied out and can be used for soil drainage and compost. The plastic components from the filters can then be placed within the plastic recycling.
System Dimensions
The system will easily fit under your kitchen sink. See the dimensions shown below:
Download The Manual
Download the manual which covers the complete installation and maintenance guide for the system from the files section below.
Model | Osmio EZFITPRO-II Chlorine, Limescale & Lead Water Filter System |
---|---|
In Depth | Minimum pressure required for system - 1.5 bar To ensure the maximum pressure is not exceeded we recommend fitting a pressure reduction valve to 4.5 bar max. Between 3-4 max for good flow rate Filter 1: NSF Certified 5 Micron Carbon Block Micron Rating: 5 micron Dimensions: 9 3/4" x 2 1/2" Temperature Range:Only can be used with cold water Filter Life: About 16000 litres or 6 months Filter Media: Extruded coconut shell carbon block Max. Flow Rate: Approx. 4 LPM Filter 2: Osmio 2.5 x 10 Chlorine & Limescale Filter Dimensions: 9 3/4" x 2 1/2" Temperature Range: Only can be used with cold water Filter Life: approx 3-6 months depending on hardness and overall water quality Assembled in the United Kingdom. Capacity: 1080 Litres @ 150ppm Total Hardness - 540 Litres @ 300ppm Total Hardness. Replace after 6 months of installation date Max. Flow Rate: Approx. 4 LPM For max reduction use at 1-2 LPM |
Filter Parameter | Chlorine, Sediments, Limescale, Heavy Metals |
Product Questions
https://www.osmiowater.co.uk/water-filters/reverse-osmosis-water-filters.html
Thanks
Ciaran
Does this setup affect the water pressure and flow rate on existing tap?
Also do you have a spec sheet listing the contaminents and the percentages of what it removes?
Thanks
No there isn't a technical data sheet for this particular product as a system. There is for Osmio Clarity which is standalone, so nothing to do with the tap.
How much does this reduce the water pressure? I'm planning to feed this into a Quooker tap so that all water is filtered (by default, the Quooker only filters water on demand). The Quooker requires a minimum input of 2 bar.
I appreciate the input pressure is a factor, but how much reduction is expected, if any?
Many thanks,
Graeme